LEYCO®-RM 25: Product-No. 20.174
LEYCO®-RM 25 is suitable for application in the foodstuffs sector, sanitary cleaning in agriculture.
LEYCO®-RM 25 removes fast and effectively areas of fat and protein from acid-insensitive surfaces.
It is advisable to test the suitability of this product on a small area before it is applied to the whole.
LEYCO®-RM 25 is not usable on acidsensitive surfaces.
LEYCO®-RM 25 is a high-activity basic cleaner based on inorganic substances and Tensides. It is free from organic solvents and contains no chlorinated hydrocarbons.
Density: 1,1 g/cm3
Appearance: yellowish, clearly
Dilution: HD devices: 1 – 5% (30°C) 0.3 – 2% (60°C)
Voransatz f. of HD devices: 1-25 %
Voransatz f. Vorsprühgeräte: 1 + 3 T. Wasser
pH value: 2
Depending upon contamination LEYCO®-RM 25 can be applied by sprayer at a 25% solution, or applied by high pressure equipment at a ratio of1-5 %.
After a short impact time rinse thoroughly with water. Do not allow LEYCO®-RM 25 to dry on the surface.
LEYCO®-RM 25 was developed for maintenance cleaning by means of high pressure equipment or spraying equipment. It is most economically used where a 25% dilution is used, allowed to react and the washed with plenty of water through a high pressure cleaner.
Protect against frost. Store in sealed container.
Minimum shelf-life 30 months.
Avoid Contact with eyes and skin. Immediately wash off any splashes from the skin with plenty of clean water. Use rubber gloves when used by hand. If splashed into eyes, immediately wash out with plenty of water and seek medical advise.
UBA-No.: 0595 – 0072