BETONAC®-FIX 2

• Economical – dilutes with water
• Fast acting – saving time
• Almost odourless – causes minimal irritation
• Degreasing action – leaves a brighter finish
• Highly biodegradable

BETONAC-FIX 2 is a concentrate and should be diluted with water between 1 and 10 times depending on the degree of contamination of the surface to be cleaned.
Application is by means of a brush. Where there are heavy deposits repeated applications might be necessary. The cleaning action is visible by the foaming reaction on contact with the contaminations of concrete or cement. If the foaming stops further applications are needed until the surface is cleaned. After cleaning the surfaces must be well rinsed with water.

Colour: Red
Form: Liquid
Specific Weight: 1,15
pH Value: < 0,5
Contents: Hydrochloric acid, biodegradable non-ionic tensides

BETONAC-FIX 2 may not be stored in metal containers. Do not apply this product to enamal. Always try this product on a small area before widespread application.

BETONAC-FIX 2 is irritant to eyes, skin and breathing. Avoid contact with eyes and skin. In case of contact with eyes, rinse immediately withplenty of water and seek medical advice. Wear suitable protctive clothing, gloves and eye/face protection.